shanghai xuanyu building windows and doors co.,ltd

Which type of window should be chosen for good sound insulation?

I. Don't mistake high-frequency/low-frequency noise   Low-frequency noise is a relatively special type of sound. Defining it as the sound with a vibration frequency below 500Hz is a more accurate description, and the range of 20Hz - 500Hz specified in China more specifically defines the frequency range of low-frequency noise. This means that within this range, the irregular sounds generated by 20 to 500 vibrations per second all fall within the category of low-frequency noise.   For example, in a building, high-frequency noise may be blocked by walls, doors, and windows, and the sound is significantly weakened. However, low-frequency noise can easily penetrate the walls, like an invisible force, continuously affecting the indoor environment. Sounds such as the operation of the external units of large air conditioners and the low-frequency rumbling of vehicles on the traffic road can still be clearly heard even after a certain distance and the obstruction of buildings. This is a typical manifestation of the difficulty of low-frequency noise attenuation. This characteristic makes low-frequency noise a relatively difficult noise problem to deal with, continuously interfering with people's living and working environments.   The attenuation characteristic of high-frequency noise during the propagation process is very obvious. When it travels further or encounters obstacles, its energy will be quickly dispersed and consumed. Just as mentioned before, for every doubling of the propagation distance, the noise will attenuate by 6dB, which is a very important measurement standard.   Take an example from daily life. The sound of walking is a typical representative of high-frequency noise. When we walk, the sound generated by the contact between our shoes and the ground is mainly composed of high-frequency components. When this sound propagates in a relatively open area, as the distance increases, the sound heard by the people around will become smaller and smaller. If there are obstacles such as walls in between, the weakening of the sound will be even more significant.   Unlike high-frequency noise, low-frequency noise will not change significantly due to the increase in distance, which enables it to still maintain a strong influence at a relatively far distance. For example, in a building, even if the elevator machine room is located on the top floor, the low-frequency "buzzing" sound generated when the elevator is running can spread to the lower floors along the building structure, allowing the residents on other floors to hear it. It can easily penetrate obstacles such as walls and floors. This strong penetrating power makes low-frequency noise a very thorny problem in sound insulation treatment.

Surface Finishes for Aluminum Alloy Windows: A Technical Overview for Markets

Introduction In international construction and architectural projects, the surface finish of aluminum alloy windows plays a crucial role in aesthetics, durability, and long-term performance. This guide walks you through four industry-leading treatments—anodizing, powder coating, PVDF (fluoropolymer) coating, and wood-grain transfer—explaining each process, its key steps, and why it matters for architects, fabricators, and end clients.   1. Anodizing What It Is An electrochemical process that converts the aluminum surface into a hard, wear-resistant oxide layer. Key Steps Pre-cleaning: Degreasing and alkali wash to remove oils and mill scale. Acid Etch: Light etching to ensure uniform oxide growth. Anodic Oxidation: Submerge in sulfuric acid bath, apply DC current—oxide forms on the aluminum substrate. Sealing: Hydration of the pores to lock in corrosion resistance and color stability. Why Choose Anodized Windows? Durability: Very high scratch and abrasion resistance. Corrosion Protection: Excellent performance in coastal and humid climates. Color Consistency: Natural metallic sheen or integral color options with long-term fade resistance. 2. Powder Coating What It Is A dry finishing technique where finely ground pigment and resin particles are electrostatically charged and sprayed onto the aluminum profile, then heat-cured. Key Steps Surface Pretreatment: Phosphate or chrome-free conversion coating for superior adhesion. Electrostatic Spray: Charged powder particles uniformly cover the profile. Curing Oven: Elevated temperature (160–200 °C) melts and cross-links the powder into a continuous film. Why Choose Powder-Coated Windows? Color Range: Hundreds of RAL and custom shades, with matte, gloss, or metallic finishes. Environmental Safety: Zero-VOC, minimal overspray waste. Resilience: Excellent impact resistance, UV stability, and chemical resistance. 3. Electrophoretic Coating Electrophoretic coating (also known as E-coating) is a process in which charged paint particles suspended in an aqueous medium migrate under an electric field and deposit uniformly onto a conductive metal part, forming a smooth, corrosion-resistant film. Key Steps Pretreatment & Cleaning Degreasing: Remove oils and lubricants using an alkaline solution or organic solvents. Acid/Alkali Wash: Strip oxide scale and surface contaminants to expose fresh metal. Activation & Phosphating (Optional) Immerse in a phosphate conversion coating bath to generate a thin, crystalline phosphate layer that enhances paint adhesion. Electrophoretic Deposition Hang the aluminum profile as the anode and immerse it in the E-coat bath. Apply DC voltage so that charged paint particles migrate and deposit uniformly, even in recesses and corners. Control film thickness precisely via voltage and dwell time. Rinse & Neutralization Thoroughly rinse or spray with water to remove any unbonded paint particles, preventing water spotting or chalking in later stages. Bake & Cure Dry and cure in an oven at 120–180 °C to cross-link the paint into a tough, chemically bonded film. Why Choose Electrophoretic Coating Uniform Coverage: Electric-field migration ensures full, even coating—even inside hollow sections and tight corners. Exceptional Adhesion: The film bonds tightly to the substrate, resisting impact, bending, and flexure without cracking or peeling. Superior Corrosion Resistance: E-coat primers routinely achieve over 500 hours in salt-spray testing, providing an excellent foundation for subsequent topcoats. Environmentally Friendly: Water-based chemistry yields very low VOC emissions, and the bath can be continuously recycled to minimize waste. Cost-Effective for Volume Production: High automation levels reduce labor costs compared to manual spray applications, making it ideal for large-scale runs.   4. Wood-Grain Transfer What It Is A decorative finish that replicates natural timber patterns on aluminum through a heat-transfer process. Key Steps Primer Coat: Apply a specially formulated base paint to the profile. Film Transfer: Wrap or wrap the profile in a dyed wood-grain film and pass through a heated vacuum chamber. Protective Overcoat: Seal with a clear lacquer for UV and abrasion resistance. Why Choose Wood-Grain Windows? Timber Aesthetics Without Maintenance: Elegant wood look with all the benefits of aluminum. High Fidelity Graphics: Realistic grains, knots, and textures. Stable Performance: No warping, cracking, or insect issues typical of real wood.   Conclusion Selecting the right surface treatment is vital for meeting both the functional demands and aesthetic expectations of global projects, environmental friendliness (powder coat), coastal corrosion resistance (anodize), or wood-like elegance (grain transfer), these proven processes ensure your aluminum alloy windows perform beautifully for decades. For tailored advice or project quotations, feel free to reach out—our engineering and finishing teams are ready to help you specify the perfect finish for your next build

Bahamas Villa project

Bahamas Villa project, hurricane and impact resistant

American project

American beach House project, hurricane and impact resistant

Feedback pictures with our clients

Pictures of Windows and doors from a client project in Mexico